» Laminate Covered Panels (HPL)
Core Material : According to the desired load capacity, 30 or 38 mm thick and min 650 kg/m3 density chipboard is used.
Top Covering : 1 mm thick, overlay covered HPL laminate resistant to abrasion.
Bottom Covering : Depending on the needs, 0,5 mm thick sheet steel, 0,2 mm thick aluminum sheet or 0,05 mm thick aluminum foil are used.
Edge Covering : 0,4 mm thick hard PVC. It can be applied in colors appropriate to the top covering.
» PVC Covered Panels
Core Material : According to the desired load capacity, 30 or 38 mm thick and min 650 kg/m3 density chipboard is used.
Top Covering : In various thicknesses and as appropriate to the aim, PVC can be used in features like homogeneous, heterogeneous, antistatic, conductive, linoleum, etc.
Bottom Covering : Depending on the needs, 0,5 mm thick sheet steel, 0,2 mm thick aluminum sheet or 0,05 mm thick aluminum foil are used.
Edge Covering : 0,4 mm thick hard PVC. It can be applied in colors appropriate to the top covering.
» Galvanized Sheet Steel Covered Panels
Core Material : According to the desired load capacity, 30 or 38 mm thick and min 650 kg/m3 density chipboard is used.
Top Covering : 0,5 mm thick sheet steel. It is used in places where high resistance required, and is suitable for covering with carpet.
Bottom Covering : 0,5 mm thick sheet steel.
Edge Covering : 0,4 mm thick hard PVC.
» Aluminum Sheet/ Foil Covered Panels
Aluminum Sheet
Core Material : According to the desired load capacity, 30 or 38 mm thick and min 650 kg/m3 density chipboard is used.
Top Covering : 0,2 mm thick aluminum sheet. It is an ideal solution for bare or carpet covered places.
Bottom Covering : Depending on the needs, 0,5 mm thick sheet steel, 0,2 mm thick aluminum sheet or 0,05 mm thick aluminum foil are used.
Edge Covering : 0,4 mm thick hard PVC.
Aluminum Foil
Core Material : According to the desired load capacity, 30 or 38 mm thick and min 650 kg/m3 density chipboard is used.
Top Covering : 0,05 mm thick aluminum foil/0,2 mm thick aluminum sheet is generally used in places to be covered with carpet.
Bottom Covering : Depending on the needs, 0,5 mm thick sheet steel, 0,2 mm thick aluminum sheet or 0,05 mm thick aluminum foil are used.
Edge Covering : 0,4 mm thick hard PVC.
Güngören Mah Turgut Özal Blv. Hilal İş Merkezi No: 64 E Blok D:19 Çekmeköy / Istanbul / TURKEY |
---|
sales@alemsan.com | + 90 216 429 24 79 | + 90 555 728 37 52 |
---|